HVAC energy efficiency consulting
Your loop is wasting a fifth of its energy
I help building owners and engineers cut the energy consumption of closed-loop heating and cooling systems — engineered around Hydromx® heat-transfer nanofluid and verified with data.
- Focus
- Closed & fluid loop HVAC
- Method
- Hydromx® nanofluid
- Outcome
- ≥ 20% energy saved
- Payback
- ≤ 3 years, guaranteed
The problem
The cheapest energy is the energy your building doesn’t waste
In closed-loop heating and cooling, water alone is a poor heat carrier. Boilers and chillers run longer than they should, pumps work harder than they need to — and the difference lands on your energy bill, every single season.
The method
Hydromx® heat-transfer nanofluid
Hydromx® is a nanofluid that replaces the water in closed-loop HVAC systems — heating, cooling, geothermal, solar and heat recovery. It carries heat far more efficiently, so boilers and chillers reach setpoint faster and run less.
Installation is non-invasive: no mechanical changes, no downtime. The fluid is backed by an NSF-certified life cycle assessment, a published EPD, and a 20-year limited warranty.
Protects against
- Freeze
- Corrosion
- Scaling
- Burst
- Bacteria
- Certification
- NSF LCA & EPD
- Warranty
- 20-year limited
- Applications
- Heating · Cooling · Geothermal · Solar
- Recognition
- NYC Accelerator · UK GBC
Results
What a treated loop delivers
Guaranteed savings
A 20% reduction in your loop’s energy consumption — guaranteed, with a maximum three-year payback on the full installation.
Total system protection
One fluid guards against corrosion, calcification, bacteria, freezing and burst — extending the working life of the entire system.
Verified carbon cuts
Proven CO₂ reduction of up to 29%, backed by an NSF-certified life cycle assessment, a published EPD, and LEED points.
Zero disruption
Non-invasive installation with no mechanical changes and no downtime — covered by a 20-year limited warranty.
How we work together
From audit to verified savings
System audit
I survey your closed loop on site: fluid volume, flow temperatures, pump and boiler runtimes, and your current energy baseline.
1 site visitSavings model
You receive a written projection of kWh, cost and CO₂ savings for your building — with a payback calculation you can take to your board.
1–2 weeksSupervised installation
The fluid exchange is non-invasive: no mechanical changes, no downtime. I supervise the fill and commission the treated loop.
Usually 1 dayVerified results
Post-installation metering is compared against your baseline, and you get a savings report that stands up to scrutiny.
First seasonProof
Installed, metered, verified
Hydromx® runs in data centers, offices, hotels, hospitals and stadiums worldwide. A selection of documented installations:
HBO Broadcasting Center
Data center
“After months of testing, the results were better than expected.” — Chief Engineer
SL Green, Building 4
Commercial office, New York
Measurably lower energy consumption on the closed loop after treatment.
Biocomplexity Institute, Virginia Tech
Research data center
Cooling loops stay clean, filters clear, no evidence of metals degradation.
Forest Green Rovers FC
Sports venue, United Kingdom
First UK club to adopt nanofluid — gas bill and carbon emissions cut by 30%.
Gold City Hotels & Resorts
Hospitality, solar thermal
Efficiency of 300 solar panels increased by 30% after switching fluids.
Hennepin County Forensic Science Building
Government & public
Closed-loop treatment delivered verified savings in a critical facility.
In their words
“We are delighted that our football club is the first in the UK to use nanotechnology to cut our gas bill and carbon emissions by 30%.”
Contact
Let’s look at your loop
Send me a few details about your building and I’ll come back with an honest first assessment — including whether your system is a good candidate at all.
- Building type
- Office, hotel, data center…
- Loop volume
- If known — I can estimate
- Annual energy spend
- Heating & cooling
- Response time
- Within 1 business day